High Strength Steel Plate
High Strength Steel Plate is a material used to make several products from plates to sheets. The properties inherent by these plates depend upon the elements added to them.
Product Introduction
High Strength Steel Plate is a versatile material that can be shaped into various forms, including plates and sheets, for different applications. The characteristics of these plates are determined by the elements incorporated in them. High-strength steel plates are a specific type of plate that provides increased durability, form-ability, and welding capabilities. Compared to conventional steel, they exhibit superior resistance to corrosion caused by exposure to the atmosphere.
The presence of titanium and molybdenum in High Tensile Strength Steel Plate renders it favorable for heat treatment and bending. They are widely applied in the construction of steel frames, pipe systems, and load-bearing beams. High Strength Weldable Steel plates can be connected through either manual welding techniques or modern automated equipment. Both these techniques give the same end results and do not hamper the property.
High Yield Steel Plate has the capacity to endure structural loads up to the point of failure is measured as its yield strength. High Yield Steel Plate provides superior durability against a variety of structural loads, enabling it to withstand the rigorous demands of the most challenging applications on the planet. After undergoing heat treatment and mechanical profiling, S500MC exhibits unparalleled strength characteristics. This material is well-suited for heat treatment and bending, as it contains low to high levels of titanium (Ti) and medium to ultra-high levels of molybdenum (Mo). The alloying content ensures that the material maintains its yield behavior even after undergoing such processes. Cold formed components, such as cold pressed parts and sections, can be easily produced using S500MC Sheet. Its common applications include load bearing beams, steel frames, and pipework.
While S700MC boasts impressive capabilities when it comes to bending and folding, it is important to ensure that it meets the necessary specifications for the intended task. S700MC is versatile in terms of welding, as it can be welded manually or with automatic equipment using any electrical welding method, as long as the necessary technical guidelines are followed. S700MC Steel Plate should be normalized and stress relief annealing above 580°C with long holding times results in a reduction of yield strength and tensile strength as compared to the ‘as delivered’ condition which is why such heat treatments should be avoided.
Hot-forming is not recommended for this particular type of steel. Should low-voltage annealing be necessary to counteract welding stresses, it is recommended to carry out annealing for a duration of 30 minutes within the range of 530°C to 580°C.
BENEFITS OF HIGH STRENGTH STEEL PLATE
Ø Economy: By enhancing the durability of steel, it is possible to optimize the size of the structural components according to specific engineering needs. This can lower the expenses of manufacturing and assembling processes, which is a crucial objective in economies with high labor costs.
Ø Architecture: By decreasing the size of structural components, it becomes possible to create exceptional and refined structures that harmoniously blend into the environment.
Ø Environment: Opting for steel-reduced construction practices supports the conservation of our planet’s increasingly scarce resources.
Ø Safety: Modern high strength steel grades possess characteristics beyond high strength values. Special grades offer a superior level of strength and toughness, ensuring that the structures created with them are both safe during fabrication and application. In particular, modern off-shore steel grades performing at some of the lowest service temperatures are a good example.
High Strength Steel Plate Grade
Ø Grade 300M high tensile steel: Equivalent Grades; DIN 1.6928, UNS K44220, ASTM A579, ASTM A646, AMS 6417, AMS 6419, MIL S-8844D, S-8844 Class 2
Ø Grade 4140 high tensile steel: Equivalent Grades; AS1444-1996 4140, BS970-1955, EN19A, BS970 Part 3-1991 709M40, ASTM A29/29M 1991 4140, SAE/AISI 4140
Ø Grade 4145H high tensile steel: Equivalent Grade; API Spec 7, SAE J1268, UNS H41450, ASTM A304
Ø Grade 4340 high tensile steel: Equivalent Grade; AS1444-1996 4340, BS970-1955, EN24, BS970 Part 3-1991 817M40, ASTM A29/29M 1991 4340, SAE/AISI 4340
Ø Grade EN25 high tensile steel: Equivalent Grade; AS1444-1996 X9931, BS970-1955 EN25, BS970 Part 3-1991 826M31
Ø Grade EN26 high tensile steel: Equivalent Grade; AS 1444-1996 X9940, BS970-1955 EN26, BS970 Part 3-1991 826M40
Thickness Range: 6mm to 300mm
Width Range: 900mm to 4100mm
Length Range: 3000mm to 25000mm
Origin of raw materials: China, USA, Europe, Japan, Korea
Brand we mainly distributed: Dillinger Hutte, JFE Steel Corporation, Voestalpine AG, Wuyang, Nippon steel & Sumitomo Metal Corporation, POSCO Steel, Dongkuk Steel, Krakatau Posco, Nanjing Iron & Steel Co. (NISCO), Jiangyin Xing cheng Special Steel (JYXC), JWS
Value added services available: Cut-to-length, Laser cutting, Edge preparation, Welding, Color coding, Bending and mechanical processing
Package: bundled by steel strip, Standard seaworthy export packing
Hot Tags: high strength steel plate, China high strength steel plate manufacturers, suppliers, factory
Send Inquiry
Tell us the grade, size and quantity you need — we reply within 24 hours.
