Monel 400 Plate

Monel is a common name for a group of nickel alloys that contain nickel the most with copper and other elements. The alloy is called cupronickel when the copper content exceeds nickel content.

Send Inquiry

Product Introduction

Monel 400 Plate

Monel refers to a family of nickel alloys primarily composed of nickel the most and copper alongside various other elements. Cupronickel is the term used to describe alloys with a higher proportion of copper than nickel. Monel typically consists of a nickel content ranging from 52% to 67%. Compared to pure nickel materials, Monel’s composition and properties provide it with increased strength and durability. Monel can be formed through either hot rolling or cold drawing processes. Monel products produced by cold drawing exhibit high dimensional accuracy while hot-rolled ones possess superior strength. The Monel alloy demonstrates exceptional resistance to the rapid flow of seawater, among other environmental factors. Due to its resistance to the rapid flow of seawater, Monel is an ideal material for use in marine and seawater applications. It is easy to be welded, machined, and cold worked upon this material.

The MONEL® nickel-copper alloy 400 (UNS N04400/ W.Nr. 2.4360 and 2.4361) can only be strengthened through cold working due to its solid-solution structure. The Monel alloy exhibits outstanding strength and resilience across various temperatures, and remarkable resistance to a multitude of corrosive environments. The versatile Alloy 400 finds extensive applications in various industries, particularly in marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills, process vessels, and piping; boiler feedwater heaters and other heat exchangers; and deaerating heaters.

Specification	ASTM B127, SAE AMS 4544
Standard	ASME, ASTM, AISI, AMS, JIS, EN, DIN, GB/T
Grade	UNS N04400, 2.4360, alloy 400, Monel 400
Thickness of Plate	4.76MM-70MM and width >250mm
Thickness of sheet	Thickness <4.76MM and width >600mm
Thickness of Strip	Thickness <4.76MM and width <600mm
Finish for sheet	No.1 finish-hot roolled, annealed and descaled
	No.2D finish-cold-rolled, dull finish
	No.2B finish-cold-rolled, bright finish
	No.3 finish-intermediate polished finish, one or both sides
	No.4 finish-general purpose polished finish, one or both sides
	No.6 finish-dull satin finish, tampico brushed, one or both sides
	No.7 finish-high luster finish
	No.8 finish-mirror finish
Finish for strip	No.1 finish-cold rolled to specified thick-ness, annealed, and descaled
	No.2 finish-same as No.1 finish, followed by a final light cold-roll pass, general on highly polished rolls
	Bright annealed finish-a bright cold-rolled finish retained by final annealing in a controlled atmosphere furnace
	Polished finish-strip is also available in polished finishes such as No.3 and No.4
Finish for plate	Hot-rolled or cold rolled, and annealed or heat treated, and blast cleaned or pickled
	Hot rolled or cold rolled, annealed or heat treated, blast cleaned and /or ground
	Hot rolled or cold rolled, annealed or heat treated, blast cleaned and /or ground, and pickled
Edges for cold rolled strip	No.1 edge-a rolled edge, either round or square as specified.
	No.3 edge-an edge produced by slitting
	No.5 edge-an approximately square edge produced by rolling or filing after slitting
Delivery condition	Annealed, hot rolled, cold rolled, pickled, hard
Product type	Plate, sheet, coil, strip, foil, ribbon, wire
Origin of raw materials	CHINA, USA, EUROPE, JAPAN
Brand we mainly distributed	BAO STEEL, He-cheng nickel
Value added services available	Cut-to-length
	Laser cutting
	Third party witness and test arrangement
	Edge preparation
	Color coding
Package	Wooden Boxes
	Wooden pallets
	Steel Strips Bundled
	Standard seaworthy export packing
	As required