P355N Pipe
EN 10219 S355J0H Steel Grade RHS is referred to as a mild grade of steel pipes. In comparison to most steel pipes, this low carbon grade Carbon Steel EN 10219 S355J0H Rectangular Tube is known for its low cost.
 |  |
 |  |
Product Introduction
S355J0H PIPE
EN 10219 S355J0H Steel Grade RHS is referred to as a mild grade of steel pipes. In comparison to most steel pipes, this low carbon grade Carbon Steel EN 10219 S355J0H Rectangular Tube is known for its low cost. Thereby the EN 10219 S355J0H Carbon Steel Round Tube proves to be a rather cost-efficient alternative.
S355J0H EN 10219 Carbon Steel Pipes are made up of carbon, silicon, manganese, phosphorus, sulfur and niobium in the composition. There are welded and seamless tubes. The Carbon Steel EN 10219 S355J0H Welded Tubes range up to 1219.2mm in outer diameter while the seamless tubes range up to 152mm. The Carbon Steel EN 10219 S355J0H Seamless Pipes have higher dimensional accuracy and are formed by either cold drawing or hot rolling of ingots. The welded tubes and pipes are made by welding same grade of plates or sheets end to end. The pipes have up to 355MPa minimum yield strength and up to 680MPa minimum tensile strength. The EN 10219 S355J0H Carbon Steel Piping also has 40% elongation at break. The pipes come in wall thicknesses ranging from 0.5mm to 20mm with extra heavy wall thicknesses available.
EN 10219 S355J0H Steel Pipe is used in the oil and gas industrial applications to transport hot fluids through the pipelines. There are different types such as round, hydraulic, U bent and the EN 10219 S355J0H Steel Hollow Section pipes for different use cases. The square pipes and tubes have an added geometric strength. Also the material has good corrosion resistance, wear and tear resistance, oxidation resistance and toughness. The applications of the EN 10219 S355J0H Tubing can be seen in the construction, water management, oil and gas, power generation, heat exchange and boiler applications.
Product Description:
1. Standard: EN 10210-1; EN 10219
2. Materials: S355J0H
3. OD: 10.3-660mm WT: 1.6-60mm
4. Length: 5.8m-12m, or according to the clients’ request
5. Usage: Widely used in petroleum, natural gas, chemical power, fire and other industries, or as the clients’ requirement
6. End: Bevelled end or plain end
7. Marking: Size, standard, and heat number, or marking as customers’ required
8. Painting: Painting black coating, or as per the clients’ request
9. Package: Packing in bundles, caps at both ends, or as per the clients’ request
10. Quality: High quality, best price
S355J0H Carbon Steel Pipes Composition:
S355J0H Seamless Pipes Mechanical Properties:
 |
 |
 |
 |
Hot Tags: p355n pipe, China p355n pipe manufacturers, suppliers, factory
Send Inquiry
Tell us the grade, size and quantity you need — we reply within 24 hours.
